Angle Frame - SERIES S
Series S1S & S2S
The S-S Series is an angle framed access cover with 300 lb. psf (1464 kg psm) load rating. Single and double door units are supplied with spring assists and are ideal for casting into concrete top slabs directly above submersible pumps and debris baskets. Please see the drawing page for standard features. This series can also be used for underground vaults that have provisions for drainage of incidental water. This Series should not be used if water intrusion is a determining factor. (See channel framed series W-R, W-S or W-C) If required the S-S Series can also be modified to fit existing openings. For more information on this modification on this modification please consult the factory with your existing opening size(s).
Specifications ››
Protective Grating Options ››
Download S1S Drawing (PDF) ››Download S1S Drawing (DWG) ››
Download S2S Drawing (PDF) ››Download S2S Drawing (DWG) ››
Specifications ››
Protective Grating Options ››
Download S1S Drawing (PDF) ››Download S1S Drawing (DWG) ››
Download S2S Drawing (PDF) ››Download S2S Drawing (DWG) ››
PROTECTIVE GRATING OPTIONS - FOR ACCESS COVERS
Halliday Products offers an optional protective grating panel equipped with all T-316 stainless steel hardware. This lockable grating panel can be factory installed on most models in our extensive line of quality access covers. Each grating panel is powder coat finished in Safety Orange color, and is equipped with a T-316 stainless steel positive latch with release handle that secures the grating panel in the open position.
The 300 lbs (1464 kg. ) load rated grating support ledges feature built-in nut rail. Each unit is supplied with four stainless steel spring nuts used to mount pump brackets and cable holders. (Optional on H20 load rated units.)
Applications
The optional protective grating panel should be specified for applications in areas that require additional protection should the access cover be left in the open position. This option should also be considered when a single person inspection to wet wells is desirable. The grating panel has provisions for an owner-supplied padlock that would provide secondary protection against unauthorized personnel opening the access cover. This option is not available for all access covers models. Please consult the factory.
Features
Protective Grating Option for:
For 300 lbs. psf (1464 kg. per sq. meter) Load Rated DoorsThe optional protective grating panel as manufactured by Halliday Products, of Orlando, Florida shall be 1 inch (25 kg.) aluminum “I” bar grating with Safety Orange powder-coated finish. Grating shall be hinged with tamper proof stainless steel bolts, and shall be supplied with a positive latch to maintain unit in an upright position. Grating shall have a 6-in. (152mm) viewing area on each lateral unhinged side for visual observation and limited maintenance. Grating support ledges on 300 lbs. psf (1464 kg. per sq. meter) loaded access covers shall incorporate nut rail with a minimum of four (4) stainless steel spring nuts. A padlock hasp for owner-supplied padlock shall be provided.
Download OPD Grating Drawing (PDF) ››
Download OPD Grating Drawing (DWG) ››
Download OPD Grating Drawing (DWF) ››
Protective Grating Option for:
H20 Load Rated DoorsThe optional protective grating panel as manufactured by Halliday Products, of Orlando, Florida shall be 3 inch (76mm) aluminum “I” bar grating with Safety Orange powder-coated finish. Grating shall be hinged with tamper proof stainless steel bolts, and shall be supplied with a positive latch to maintain unit in an upright position. Grating shall have a 6-in. (152mm) viewing area on each lateral unhinged side for visual observation and limited maintenance. A padlock hasp for owner-supplied padlock shall be provided.
Download OPD H20 Grating Drawing (PDF) ››
Download OPD H20 Grating Drawing (DWG) ››
Download OPD H20 Grating Drawing (DWF) ››
Halliday Products offers an optional protective grating panel equipped with all T-316 stainless steel hardware. This lockable grating panel can be factory installed on most models in our extensive line of quality access covers. Each grating panel is powder coat finished in Safety Orange color, and is equipped with a T-316 stainless steel positive latch with release handle that secures the grating panel in the open position.
The 300 lbs (1464 kg. ) load rated grating support ledges feature built-in nut rail. Each unit is supplied with four stainless steel spring nuts used to mount pump brackets and cable holders. (Optional on H20 load rated units.)
Applications
The optional protective grating panel should be specified for applications in areas that require additional protection should the access cover be left in the open position. This option should also be considered when a single person inspection to wet wells is desirable. The grating panel has provisions for an owner-supplied padlock that would provide secondary protection against unauthorized personnel opening the access cover. This option is not available for all access covers models. Please consult the factory.
Features
- Aluminum “I” bar construction
- All T-316 stainless steel hardware
- Tamper proof stainless steel hinge bolts
- Lockable with owner-supplied padlock
- Hinged with positive latch to maintain upright position
- Load rated consistent with access cover
- View area for observation and limited maintenance
- Safety Orange powder-coated finish
- Nut rail and stainless steel spring nuts with 300 psf (1464 kg. per sq. meter) loaded doors only
- Lifetime Warranty
Protective Grating Option for:
For 300 lbs. psf (1464 kg. per sq. meter) Load Rated DoorsThe optional protective grating panel as manufactured by Halliday Products, of Orlando, Florida shall be 1 inch (25 kg.) aluminum “I” bar grating with Safety Orange powder-coated finish. Grating shall be hinged with tamper proof stainless steel bolts, and shall be supplied with a positive latch to maintain unit in an upright position. Grating shall have a 6-in. (152mm) viewing area on each lateral unhinged side for visual observation and limited maintenance. Grating support ledges on 300 lbs. psf (1464 kg. per sq. meter) loaded access covers shall incorporate nut rail with a minimum of four (4) stainless steel spring nuts. A padlock hasp for owner-supplied padlock shall be provided.
- Secondary protective grating panel shall be 1 inch (25mm) thick aluminum “I” bar grating.
- Grating panel color and finish shall be Safety Orange powder- coating.
- Grating panel shall be hinged with tamper proof stainless steel bolts, and shall be supplied with positive latch to maintain unit in an upright position.
- A 6-in. (152mm) viewing area shall be provided on each lateral unhinged side of grating panel, for visual observation and limited maintenance procedures.
- The grating support ledges shall incorporate nut rail feature supplied with minimum of four stainless steel spring nuts for mounting pump brackets and/or cable holders.
- A padlock hasp for owner-supplied padlock shall be provided.
Download OPD Grating Drawing (PDF) ››
Download OPD Grating Drawing (DWG) ››
Download OPD Grating Drawing (DWF) ››
Protective Grating Option for:
H20 Load Rated DoorsThe optional protective grating panel as manufactured by Halliday Products, of Orlando, Florida shall be 3 inch (76mm) aluminum “I” bar grating with Safety Orange powder-coated finish. Grating shall be hinged with tamper proof stainless steel bolts, and shall be supplied with a positive latch to maintain unit in an upright position. Grating shall have a 6-in. (152mm) viewing area on each lateral unhinged side for visual observation and limited maintenance. A padlock hasp for owner-supplied padlock shall be provided.
- Secondary protective grating panel shall be 3 inch (77mm) thick aluminum “I” bar grating.
- Grating panel color and finish shall be Safety Orange powder- coating.
- Grating panel shall be hinged with tamper proof stainless steel bolts, and shall be supplied with positive latch to maintain unit in an upright position.
- A 6-in. (152mm) viewing area shall be provided on each lateral unhinged side of grating panel, for visual observation and limited maintenance procedures.
- A padlock hasp for owner-supplied padlock shall be provided.
Download OPD H20 Grating Drawing (PDF) ››
Download OPD H20 Grating Drawing (DWG) ››
Download OPD H20 Grating Drawing (DWF) ››
SPECIFICATIONS
Series S-S Access Door
STANDARD WITH SPRING ASSIST
Specifications (bullet form)
Specifications (paragraph form)
The S1S (single leaf) and S2S (double leaf) series access frames and covers as manufactured by Halliday Products, Inc. of Orlando, Florida shall have a 1/4" (7mm) thick one-piece, mill finish, extruded aluminum frame, incorporating a continuous concrete anchor. A bituminous coating shall be applied to the frame exterior where it will come in contact with concrete. Door panel shall be 1/4" (7mm) aluminum diamond plate, reinforced to withstand a live load of 300 lbs. psf (1464 kg. psm). Uniform live load. Doors shall open to 90 degrees and automatically lock with a T-316 stainless steel hold open arm with aluminum release handle. For ease of operation, the hold open arm shall incorporate an enclosed stainless steel compression spring assist. Doors shall close flush with the frame and rest on a built-in neoprene cushion/gasket. Hinges and all fastening hardware shall be T-316 stainless steel. Unit shall lock with a T-316 stainless steel slam lock with removable key and have a non-corrosive handle. Unit shall carry a lifetime guarantee against defects in material and/or workmanship.
Download S1S Drawing (PDF) ››Download S1S Drawing (DWG) ››
Download S2S Drawing (PDF) ››Download S2S Drawing (DWG) ››
Series S-S Access Door
STANDARD WITH SPRING ASSIST
Specifications (bullet form)
- Cover Leaf(s): 1/4" (7mm) aluminum diamond plate.
- Angle Frame: 1/4" (7mm) aluminum with continuous anchor flange.
- Frame Coating: Bituminous coating where in contact with concrete.
- Load Rating: 300 lbs. psf (1464 kg. psm) uniform live load.
- Locking System: Type 316 stainless steel slam lock with removable key.
- Cover equipped with the following stainless steel features: spring assists, T-316 tamper proof attaching hardware, automatic T-316 hold open arm with aluminum latch.
- Cushion / Gasket: neoprene.
- Guarantee: Access covers shall carry a lifetime guarantee against defects in material and/or workmanship.
Specifications (paragraph form)
The S1S (single leaf) and S2S (double leaf) series access frames and covers as manufactured by Halliday Products, Inc. of Orlando, Florida shall have a 1/4" (7mm) thick one-piece, mill finish, extruded aluminum frame, incorporating a continuous concrete anchor. A bituminous coating shall be applied to the frame exterior where it will come in contact with concrete. Door panel shall be 1/4" (7mm) aluminum diamond plate, reinforced to withstand a live load of 300 lbs. psf (1464 kg. psm). Uniform live load. Doors shall open to 90 degrees and automatically lock with a T-316 stainless steel hold open arm with aluminum release handle. For ease of operation, the hold open arm shall incorporate an enclosed stainless steel compression spring assist. Doors shall close flush with the frame and rest on a built-in neoprene cushion/gasket. Hinges and all fastening hardware shall be T-316 stainless steel. Unit shall lock with a T-316 stainless steel slam lock with removable key and have a non-corrosive handle. Unit shall carry a lifetime guarantee against defects in material and/or workmanship.
Download S1S Drawing (PDF) ››Download S1S Drawing (DWG) ››
Download S2S Drawing (PDF) ››Download S2S Drawing (DWG) ››