Mass Products
  • Home
  • About Us
  • Products
    • Access Covers >
      • Access Covers by Mass
      • Composite Manhole Covers
      • HP Access Covers >
        • Angle Frame Series S
        • Channel Frame Series W
        • H20 Load Rated Series H
        • Specialty Covers Series C, R, F
        • Protective Grating
    • Halliday Products >
      • Ladders
      • Debris Baskets
      • Mixer Mast
      • Portable Hoist
      • Slide & Stop Gates Series G,N
      • Telescoping Valves
    • Fall Protection >
      • Retro-Grates
      • Safety Grates
    • Manhole Cover Lifting Equipment >
      • Italifters
    • Transport Solutions >
      • Roadpod
    • Hydraulic Tools >
      • DOA Hydraulic Tools
    • Waste Management Solutions
    • Pump Station Refurbishment
  • Contact

DEBRIS BASKETS - SERIES B

Picture
Halliday Products offers a variety of debris baskets and guide rail systems for applications with up to 36 inch (914mm) diameter influent lines. Our economical debris basket systems are manufactured in aluminum, type 304 stainless steel or type 316 stainless steel and as with all of our products, custom sizes are not a problem.


Series B1A - Trash Basket
Perforated style trash baskets are used to screen out solids that may otherwise damage pumping equipment in wet wells. This style basket is for light duty applications, screening up to an 8 inch (302mm) influent pipe. Standard baskets are manufactured of aluminum or stainless steel and are used in conjunction with either an extruded aluminum or stainless steel pipe rail system, which is used to position the basket at the proper elevation. The standard hole configuration is 2 inch (51mm) holes on 3 inch (77mm) centers with other hole sizes and spaces available. Trash baskets are used with portable hoists, which are used to raise and lower the basket for cleaning purposes.


Specifications ››

Download B1A Drawing (PDF) ››
​
Download B1A Drawing (DWG) ››

​
Series B1B - Trash Basket
Bar rack style trash baskets are used to screen out solids that may otherwise damage pumping equipment in wet wells. This style basket is for heavy-duty applications, screening up to a 36 inch (914mm) influent pipe. Standard baskets are manufactured of aluminum or stainless steel and are used in conjunction with a heavy-duty aluminum or stainless steel channel rail system. Units are supplied with solid aluminum or stainless steel wheels. Standard bar spacing for the front, back and bottom of the basket is 2 inches (51mm) with other spacing available. The basket sides are solid but can be perforated if required. The standard rail system doubles as a ladder and can be manufactured as a guide rail system only if required. Trash baskets are used with portable hoists, which are used to raise and lower the basket for cleaning purposes.


Specifications ››

Download B1B Drawing (PDF) ››
Download B1B Drawing (DWG) ››

SPECIFICATIONS
Series B1A

​The B1A series trash basket system as manufactured by Halliday Products, Inc. of Orlando, Florida, shall be of the perforated screen style basket, having 2" (51mm) holes on 3" (77mm) centers. The basket shall be of .080" (2mm) aluminum with aluminum tracking angles as part of the basket frame. The guide rails shall be extruded aluminum channels sized to facilitate easy operation of the basket. An aluminum basket stop shall be supplied.
SPECIFICATIONS
Series B1B

​The B1B series trash basket system, as manufactured by Halliday Products, Inc. of Orlando, Florida, shall be of the bar screen style basket, having 2" (51mm) clear opening between 1/4" (7mm) thick bars and solid sides. The heavy duty ladder/guide rail system shall be of 3" (77mm) structural aluminum channel and incorporate 1 3/8" (35mm) diameter type "D" rungs with flat resistant surface, spaced 12" (305mm) O.C.. For ease of operation, the basket will have (4) 2 1/2" (64mm) solid aluminum wheels with 1/2" (13mm) stainless steel axles. An aluminum basket stop shall be supplied loose for field mounting to insure proper basket position.
Mass Products is proud to be running accredited ISO-9001, ISO 14001 and AS-NZS 4801 management systems.
Picture
Head Office: 1/38 Export Drive,
Molendinar QLD 4214
Phone: 1300 191 960

Intl Phone: +011 61 755 632 197


Email: enquiries@massproducts.com.au
Site Maintained by Lab7 Digital
  • Home
  • About Us
  • Products
    • Access Covers >
      • Access Covers by Mass
      • Composite Manhole Covers
      • HP Access Covers >
        • Angle Frame Series S
        • Channel Frame Series W
        • H20 Load Rated Series H
        • Specialty Covers Series C, R, F
        • Protective Grating
    • Halliday Products >
      • Ladders
      • Debris Baskets
      • Mixer Mast
      • Portable Hoist
      • Slide & Stop Gates Series G,N
      • Telescoping Valves
    • Fall Protection >
      • Retro-Grates
      • Safety Grates
    • Manhole Cover Lifting Equipment >
      • Italifters
    • Transport Solutions >
      • Roadpod
    • Hydraulic Tools >
      • DOA Hydraulic Tools
    • Waste Management Solutions
    • Pump Station Refurbishment
  • Contact