DOA HYDRAULIC TOOLS AND ACCESSORIES

DOA Hydraulic Tools offer solutions for specific applications in the oil, gas, water and sewage sectors.

DON'T WORK HARDER, WORK SMARTER 

  • Increased power and productivity
  • Transportable and economically-friendly
  • ​​Safer solution ​( electric shock-free)

DOA Hydraulic Tools

GET THE JOB DONE WITH DOA HYDRAULIC TOOLS!

DOA has the largest range of hydraulic tools and solutions for the maintenance of underground pipes and general urban works.

HYDRAULIC MOTORS 

VO30 Hydraulic Motor
VO30 Hydraulic Motor

VO30 Hydraulic Motor 

For Handling Water Gate ​Valves

VO30 is a hydraulic tool designed to run the mechanical rotation of large water valves for urban networks. With the VO30 the operation is quick and effortless. VO30 is essentially a hydraulic motor with an ON/OFF valve that controls speed, torque and the number of rotations in real time.

Technical Specifications:

  • ​​Weight: 17kg
  • Dimension LxH: 100x25x25cm
  • No. of turns min/max: 22x82
  • Turns counter: Yes 
  • Torque: 400 Nm max
  • Torque regulation: Yes
  • Flow L/min: 15-40
  • ​Pressure: 100-180 bar

 

DOWNLOAD CATALOG
AH 15 Hydraulic Motor
AH 15 Hydraulic Motor

AH 15 Hydraulic Motor 
For Driving Pipe Drilling/Hot Tapping Equipment

AH15 is a tool designed for pipe drilling machines for hot tapping connection operations in gas and water network maintenance. AH15 can also be used for other rotary devices such as gates and irrigation canals, lifting/lowering rail road devices and reductors.

Technical Specifications:

  • Weight: 5.5kg
  • Dimension LxH: 18x56cm
  • ​Square Drive Size: 12mm + 1/2"
  • Flow L/min: 15-30
  • ​Pressure: 100-150 bar
  • Rotation Speed: 10-150 RPM
  • Torque Force: 55 Nm
  • Rotation Senses: oraria-antioraria CW-CCW
DOWNLOAD CATALOG

SLURRY GATE VALVE

Slurry Gate Valve SG4Slurry Gate Valve SG4
Slurry Gate Valve SG4Slurry Gate Valve SG4

Slurry Gate Valve SG4

Slurry Gate Valve Accessory for Pumps SP45- SP55 - SP65

SG4 transforms pumps into mixers to reduce solids into a more fluid state. lt can be utilised at wastewater treatment plants, anaerobic digesters, API separators, petrochemical plants and refineries, for environmental operations and for moving all liquids that are difficult to pump.

Technical Specifications:

  • Fluid Passage: Equals to 6"​​
  • Weight: 9kg
  • Cylinder Type: Double effect
  • Control Valve: 3 position open centre

WASTEWATER PUMPS & TRASH PUMPS

SP20 Trash Water Pump 2
SP20 Trash Water Pump 2

SP20 Trash Water Pump 2"

SP20 is a compact and powerful trash pump with a flow capacity of up to 800 L/min and a water depth up to 35m. It can pump solid objects up to 3cm in size. Compact, reliable and safe, the SP20 is ideal for utilities networks and general urban maintenance.

Technical Specifications:

  • Outlet mouth: 2" BSP Female
  • Dimension LxH: 22x30cm
  • Weight: 8kg
  • ​Flow L/min: 800
  • Water Head max: 35m
  • SP20 Pumpable Solids DIM. : 3cm
  • ​Rotor Material: Chromium cast iron
  • Body Material: Stainless steel INOX
  • Motor Type: Gear type group 2
  • Oil Flow: 15-30 L/min
  • Ideal Flow: 20 L/min
  • Oil Pressure: 100-210 bar
  • Back Pressure: 17 bar max
DOWNLOAD CATALOG
SP 21 ATEX Trash Water Pump 2
SP 21 ATEX Trash Water Pump 2

SP 21 ATEX Trash Water Pump 2"

SP21 ATEX has the same performance and operational characteristics as the SP20 with exception of the dimension of pumpable solids and the type of hydraulic motor. SP21 is ATEX certified for ZONE 2.

Technical Specifications:

  • Outlet mouth: 2" BSP Female
  • Dimension LxH: 22x30cm
  • Weight: 8kg
  • ​Flow L/min: 800
  • Water Head max: 35m
  • SP21 Pumpable Solids DIM. : 1cm
  • ​Rotor Material: Chromium cast iron
  • Body Material: Stainless steel INOX
  • Motor Type: ZONE 2
  • Oil Flow: 15-30 L/min
  • Ideal Flow: 20 L/min
  • Oil Pressure: 100-210 bar
  • Back Pressure: 17 bar max
DOWNLOAD CATALOG
SP45 Trash Water Pump 4
SP45 Trash Water Pump 4
SP45 Trash Water Pump 4

SP45 Trash Water Pump 4"

SP45 is a professional trash pump designed for pumping slurries, wastewater and thick liquids with a density concentration up to 25% and suspended solids up 70mm. ​

Technical Specifications:

  • Discharge mouth: 4" BSP Female
  • Dimension LxH: 40x50cm
  • Weight: 28kg
  • ​Flow L/min: 3000L/min
  • Water Head max: 16m
  • Pumpable Solids DIM. : 7cm SP45
  • Pumpable Solids DIM. : 3cm SP46
  • Rotor Type: Centrifugal open
  • ​Rotor Material: Chromium cast iron
  • Body Material: Stainless steel INOX
  • Motor Type: Gear type group 2
  • Oil Flow: 30-45 L/min
  • Ideal Flow: 38L/min
  • Oil Pressure: 140-210 bar
  • Back Pressure: 17 bar max
DOWNLOAD CATALOG
SP46 ATEX Trash Water Pump 4
SP46 ATEX Trash Water Pump 4

SP46 ATEX Trash Water Pump 4"

​SP46 is a professional trash pump designed for pumping slurries, wastewater and thick liquids with a density concentration up to 25% and suspended solids up 70mm. ATEX version of SP45 is model SP46.

Technical Specifications:

  • Discharge mouth: 4" BSP Female
  • Dimension LxH: 40x50cm
  • Weight: 28kg
  • ​Flow L/min: 3000L/min
  • Water Head max: 16m
  • Pumpable Solids DIM. : 7cm SP45
  • Pumpable Solids DIM. : 3cm SP46
  • Rotor Type: Centrifugal open
  • ​Rotor Material: Chromium cast iron
  • Body Material: Stainless steel INOX
  • Motor Type: Gear type group 2
  • Oil Flow: 30-45 L/min
  • Ideal Flow: 38L/min
  • Oil Pressure: 140-210 bar
  • Back Pressure: 17 bar max
DOWNLOAD CATALOG

HYDRAULIC DRILLS

AK 46 S Hydraulic Pistol Core Drill
AK 46 S Hydraulic Pistol Core Drill

AK 46 S Hydraulic Pistol Core Drill
For Holes Ø 30 - 100 mm

AK 46 is a unique alternative to traditional electric tools. It is ideal in the maintenance of gas, water and sewer networks. AK 46 S is a hydraulic core drill designed for manual use use with drill rigs on holes 30-100 mm in size.

Technical Specifications:

  • Cut Capacity ø : 30-100 mm
  • N° SPEED @ 20 L/min: 1000 @ 20 L/min
  • N° SPEED @ 30 L/min: 1500 @ 30 L/min
  • Weight: 8kg without handle
  • Dimension LxPxH: 40 x 9 x 32 cm
  • Distance Bit Centre to Wall angle: 4.5 cm
  • Attachment of core bit: 1-1/4 standard (internal 1/2" BSP)
  • Flow L/min: 20-30
  • ​Pressure: 140 - 180 bar
DOWNLOAD CATALOG
AK 46 G Hydraulic Pistol Core Drill
AK 46 G Hydraulic Pistol Core Drill

AK 46 G Hydraulic Pistol Core Drill
For Holes Ø 80 - 100 mm

AK 46 is a unique alternative to traditional electric tools. It is ideal in the maintenance of gas, water and sewer networks. AK 46 G is a hydraulic core drill designed for manual use with drill rigs on holes 80-160mm in size.

Technical Specifications:

  • Cut Capacity ø : 80-160 mm
  • N° SPEED @ 20 L/min: 400 @ 20 L/min
  • N° SPEED @ 30 L/min: 600 @ 30 L/min
  • Weight: 8kg without handle
  • Dimension LxPxH: 40 x 9 x 32 cm
  • Distance Bit Centre to Wall angle: 4.5 cm
  • Attachment of core bit: 1-1/4 standard (internal 1/2" BSP)
  • Flow L/min: 20-30
  • ​Pressure: 140 - 180 bar
DOWNLOAD CATALOG

HAMMER DRILL

HD13 Hammer Drill
HD13 Hammer Drill

HD13 Hammer Drill

HD13 hydraulic hammer drill (13 kg) for concrete and masonry with standard bit attachment SDS MAX. The tool is light, compact, powerful and is ideal in all drilling works where performance, manoeuvrability and safety are needed.

Technical Specifications:

  • Weight: 13 kg
  • Dimension LxH: 18 x 50 cm
  • Tool Bit Size: SDS Max
  • Flow L/min: 18 - 22
  • Ideal Flow L/min: 20
  • Pressure: 140 bar
  • BackPressure: 14 bar
  • ​Drill Capacity: ø 5-50 mm
  • Ideal Drill Capacity: ø 10 - 32mm (distance)
  • Between Hole Centre and Wall: 55 mm

    DOA HYDRAULIC TOOLS ARE ALSO AVAILABLE IN UNDERWATER VERSIONS

    AS23 Hydraulic Grinder
    AS23 Hydraulic Grinder

    AS23 Hydraulic Grinder

    AS23 is a compact angular grinder/cut-off saw. The hydraulic functioning assures power, low noise, a long operative life and maximum safety as there is no possibility of an electric shock. AS23 is indispensable during external works in the presence of water, in the maintenance of utilities networks, metal brushing for preparation of welding, works inside an excavation area and in underwater jobs.

    Technical Specifications:

    • Length: 25cm
    • Width: 32cm
    • Weight: 5kg
    • Pressure: 140-200 bar
    • ​Flow L/min: 20-34
    • Diameter Disc. : ø 230 mm - hole 22-23 mm
    • Speed Load Mod. Base: 5500 @ 30 L/min
    • Speed Load Mod. underwater: 2200 @30 L/min
      DOWNLOAD CATALOG
      DC 16 Hydraulic Disc Saw
      DC 16 Hydraulic Disc Saw

      DC 16 Hydraulic Disc Saw

      Hydraulic disc saw with disc capacity up to 400 mm (16”). The tool can install black discs for metal and diamond discs for concrete and masonry. Ergonomic and light, the DC 16 has an unbeatable power-to-weight ratio. The hydraulic functioning guarantees safety as there is no use of electricity, eliminating shock hazards and emissions.

      Technical Specifications:

      • Weight: 8.5 kg
      • Dimension LxH: 70 x 40 cm
      • Flow L/min: 30
      • Pressure: 140-180 bar
      • Disc Diameter: 35-40 cm (14-16")
      • Shaft Dimension: 2.54 cm (1")
      • Cutting Capacity: 14.5 cm with disc ø 40 cm
      • Speed RPM max: 4300 RPM
      • Rotation: CW clockwise
        DOWNLOAD CATALOG

        HYDRAULIC RECIPROCATING SAW

        RS80 Hydraulic Reciprocating Saw
        RS80 Hydraulic Reciprocating Saw

        RS80 Hydraulic Reciprocating Saw 

        For Metal and PE Pipes

        RS80 is a powerful hydraulic reciprocating saw designed to quickly and safely cut pipes made of steel, cast iron, cement and PE with a diameter up to 600mm. It can also cut segments, beams and metal manufactured products in a linear configuration.

        Technical Specifications:

        • Weight: 9 kg
        • Dimension (no blade): 50 x 19 cm
        • ​Cutting capacity max: 600 mm
        • ​Blade Stroke: 25 mm
        • Cut frequency: 10-200 per min
        • Flow: 20-30 L/min
        • Pressure: 100-210 bar

          HYDRAULIC BREAKERS

          KD 12 Breaker
          KD 12 Breaker

          KD 12 Breaker

          KD 12 hydraulic breaker (12 kg) with ‘D type’ anti-vibration handle. This tool is operator friendly and is ideal for use in general demolition works, either in a vertical or horizontal position against walls.

          Technical Specifications:

          • Weight: 12 kg
          • Dimension LxH: 18 x 56 cm
          • Tool Bit Size: 22 x82
          • Flow L/min: 18 - 30
          • Pressure: 150 bar
          • Blow Frequency: 1300 - 1500
          • Impact Energy: 5.5 kgm
          • Handle Type: "D" anti-vibration​
            DOWNLOAD CATALOG
            KV 19 Breaker
            KV 19 Breaker

            KV 19 Breaker

            KV 19 hydraulic breaker (19 kg) with ‘T type’ anti-vibration handles suspended on springs. This tool is operator friendly and ideal for use in general demolition works of concrete and asphalt cutting.

            Technical Specifications:

            • Weight: 169 kg
            • Dimension LxH: 42 x 72 cm
            • Tool Bit Size: 25 x 108
            • Flow L/min: 18 - 30
            • Pressure: 150 bar
            • Blow Frequency: 1300 - 1500
            • Impact Energy: 7 kgm
            • Handle Type: "T" anti-vibration
              DOWNLOAD CATALOG

              VENTILATORS AND ASPIRATORS

              We offer a complete range of ventilators/aspirators which are powerful, effective and easy to transport. The use of ventilation and safety in closed spaces is mandatory and prescribed by law, before, during and after work in environments that are toxic, flammable or explosive. These can include tunnels, basements, manholes, petrochemical plants, wells, fuel stations, warehouses, mines, laboratories, confined space excavations and sewer ducts.

              AV 28 H Hydraulic Ventilator/Aspirator
              AV 28 H Hydraulic Ventilator/Aspirator

              AV 28 H Hydraulic Ventilator/Aspirator

              A practical centrifugal ventilator/aspirator with hydraulic motor which is powerful and easy to transport. The machine is extremely lightweight and can be used with or without the hose.

              Technical Specifications:

              • Weight: 21 kg
              • Dimension LxPxH: 60 x 57 x 74
              • Hydraulic Flow L/min: 20 - 40
              • Pressure: 100 - 210 bar
              • Material of Body and Fan: Polyethylene
              • Opening Diameter: 200 mm (8")
              • Air Flow:​ 2100 m x h @ 2900 RPM of fan
                DOWNLOAD CATALOG
                AV 28 S Ventilator/Aspirator With Gasoline Engine
                AV 28 S Ventilator/Aspirator With Gasoline Engine

                AV 28 S Ventilator/Aspirator With Gasoline Engine

                A practical centrifugal ventilator/aspirator with hydraulic motor which is powerful and easy to transport. Extremely lightweight can be used with or without the hose.

                Technical Specifications:

                • Weight: 21 kg
                • Dimension LxPxH: 60 x 57 x 74
                • Power Electrical Motor: 230 v - 1.5 kW
                • Power Gasoline Engine: 3 hp - Honda
                • Material of Body and Fan: Polyethylene
                • Opening Diameter: 200 mm (8")
                • Air Flow:​ 2100 m x h @ 2900 RPM of fan
                  DOWNLOAD CATALOG
                  AV 28-E Ventilator/Aspirator With Electric Motor
                  AV 28-E Ventilator/Aspirator With Electric Motor

                  AV 28-E Ventilator/Aspirator With Electric Motor

                  A practical centrifugal ventilator/aspirator with 230 V electric motor which is powerful and easy to transport. The machine is extremely lightweight and can be used with or without the hose.

                  Technical Specifications:

                  • Weight: 21 kg
                  • Dimension LxPxH: 60 x 57 x 74
                  • Power Electric Motor: 230 V 1.5 kW
                  • Material of Body and Fan: Polyethylene
                  • Opening Diameter: 200 mm (8")
                  • Air Flow:​ 2100 m x h @ 2900 RPM of fan
                    DOWNLOAD CATALOG
                    AV 28-E ATEX Explosion-Proof Ventilator/Aspirator
                    AV 28-E ATEX Explosion-Proof Ventilator/Aspirator

                    AV 28-E ATEX Explosion-Proof Ventilator/Aspirator

                    Practical centrifugal ventilator/aspirator with 230 V electric motor ATEX certified: Cat. II – 2G – IIC – c – T4. It is powerful and easy to transport.​ The machine is extremely lightweight and can be used with or without the hose.

                    Technical Specifications:

                    • Weight: 21 kg
                    • Dimension LxPxH: 60 x 57 x 74
                    • Power Electric Motor: 230 V 1.5 kW
                    • Material of Body and Fan: Polyethylene
                    • Opening Diameter: 200 mm (8")
                    • Air Flow:​ 2100 m x h @ 2900 RPM of fan
                      DOWNLOAD CATALOG

                      HYDRAULIC POWER PACKS

                      The power-to-weight ratio of hydraulic tools is unbeatable! A comparative test clearly demonstrates this advantage which results in increased productivity and reduced operator fatigue.

                      Manta
                      Manta

                      Manta
                      Hydraulic Power Pack With ​Electric Generator

                      MANTA is the only hydraulic power pack on the market with electric generator 2.2 KVA - 230 V. The dual function makes MANTA the most versatile machine of its kind and adapts to any situation. It operates with most hydraulic and electrical tools. The hydraulic or electric functioning is immediately selected by a lever.

                      Technical Specifications:

                      • Weight: 95 kg
                      • Flow L/min: 30
                      • Electric Power: 2.2 KVA -50 Hz two outlets
                      • Engine: Petrol 14 hp
                      • Acceleration: Automatic
                      • Dimension LxWxH 85 x 60 65 cm
                      • Pressure: 140 bar
                      • Start Up: Recoil - Battery
                      • ​Hoses Length std: 7 m
                        DOWNLOAD CATALOG
                        Super Raptor E
                        Super Raptor E

                        Super Raptor E
                        Hydraulic Power Pack With Tri-Phase Motor

                        A professional power pack with tri-phase electric motor designed to power hydraulic tools and equipment. SUPER RAPTOR E is manufactured for heavy duty operations. The high efficiency oil cooling system with exclusive double radiator guarantees the best performance even in the hottest climate and demanding applications.

                        Technical Specifications:

                        • Weight: 120 kg
                        • Dimension LxWxH:
                        • Flows at 2900 RPM of electric motor
                        • 26 L/min with pump 9 cc
                        • 32 L/min with pump 11 cc
                        • 40 L/min with pump 14 cc
                        • Pressure: 140 - 210 bar
                        • Type Motor: Tri-phase 400 V - 50Hz
                        • Motor Power: 9-11-15 kW
                        • Hoses Length std: 7 m
                          DOWNLOAD CATALOG
                          HYDROBOX
                          HYDROBOX

                          Hydrobox
                          Hydraulic Auxiliary Group for Trucks and Vans

                          HYDROBOX is a compact, hydraulic accessory which can be installed on all vehicles equipped with a hydraulic pump. HYDROBOX transforms vehicles into economical power sources for hydraulic tools and various hydraulic equipment such as winches, generators, cranes and compressors.

                          Technical Specifications:

                          • Weight with Oil: 38 kg
                          • Dimensions: 480 x 300 x H 450 mm
                          • Tank Capacity: 15 L (possibility to have larger tank capacity)
                          • Flow max: 42 L/min (adjustable)
                          • Pressure max: 210 bar
                          • Radiator: 2 high efficiency radiators with centrifugal fan 12 volt
                          • On/Off Valve: 3 ways, open centre with relief valve
                            DOWNLOAD CATALOG

                            TO VIEW OUR RANGE OF HYDRAULIC TOOLS, REQUEST AN INFO PACK.

                            PHONE

                            Ask us about our extensive range of DOA hydraulic tools.

                            Call us on  +61 75563 2197

                            Head Office: 1/38 Export Drive, Molendinar QLD 4214

                            MAKE AN ENQUIRY